| Customization: | Available |
|---|---|
| Dimensions (H X W X D): | 179 X77 X 42 mm |
| Weight: | Approx. 495 G-550 G |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Dräger X-am 8000Multi-Gas Detector
Clearance measurement was never this easy and convenient:The 1 to 7 gas detector detects toxic and flammable gases as well as vapours and oxygen all at once - either in pump or diffusion mode.Innovative signalling design and handy assistant functions ensure complete safety throughout the process.
| Dimensions (H x W x D) | 179 x77 x 42 mm | |
| Weight | Approx. 495 g, depending on sensor configuration, without strap, without pump Approx. 550 g, depending on sensor configuration, without strap, with pump |
|
| Housing | Durable two-component housing | |
| Display | High-contrast colour display | |
| Temperature | -20 ºC to 50 ºC | |
| Pressure | 700 to 1,300 hPa (measuring function) 800 to 1,100 hPa (use in explosion-hazard areas) |
|
| Relative humidity | 10 to 90 % (short-term up to 95 %)r.h. | |
| Alarms | Visual: | 3 LED 'red'(gas alarms), 3 LED 'yellow'(device alarms) |
| Acoustic | Multi-tone, typically 100 dB(A) at 30 cm | |
| Vibration | ||
| Ingress protection class | IP 68 | |
| Energy supply | Lithium-ion battery, rechargeable, inductive charging | |
| Operating times (Diffusion) | With CatEx and 3 EC sensors | Typically 24 hours |
| With lR and 3 EC sensors | Typically 22 hours | |
| With 3 EC sensors | Typically 120 hours | |
| With CatEx, PlD and 3 EC sensors | Typically 17 hours | |
| With lR, PlD and 3 EC sensors | Typically 16 hours | |
| With CatEx-, IR- and 3 EC sensors | Typically 14 hours | |
| PID only | Typically 42 hours | |
| Charging times | Typically 4 hours after use during a shift of max. 10 hours | |
| Start-up times | Typically <60 seconds for standard sensors | |
| Data storage | 24 MB, e.g. at 10 minutes per hour of gas exposure with measuring values changing bythe second on all 7 channels: approx. 400 hours | |
| Pump operation | Max. hose length 45 m | |
| Approvals | Marking Explosion Protection: | |
| ATEX /IECEX | I M1, II 1G | |
| Ex da ia l Ma, Ex da ia llC T4 Ga | ||
| EAC | PO Ex da ia l Ma X | |
| OEx da ia llC T4 Ga X | ||
| cCSAus | Class l, Zone 0, AEx da ia llC T4 Ga | |
| Class ll, Div 1, Gr. E,F,G | ||
| C22.2 No.152,ANSISA 12.13.01:2000 | ||
| ANZEx | Ex da ia l Ma, Ex da ia llC T4 Ga | |
| Measurement Performance: | Explosion protection according ATEX: EN 60079-29-1(CatEx 125 PR, CatEx125 PR Gas, (Dual) IR Ex, XXS H2 HC) CatEx 125 PR and (Dual) IR Ex: methane,propane, n-nonane, etc. The following applies to the CatEx 125 PR and approved gas "n-nonane": Only in conjunction with pump adapter "Nonan"part number: 3720225 |
|
| Oxygen deficieny/excess oxygen: EN 50104 (XXS O,/ XXS O,PR) |
||
| Toxic gases: EN 45544-1, EN 45544-2,EN 45544-3(XXS H,S LC, XXS CO LC, (Dual) IR COz) |
||
| Software: EN 50271 | ||
| Directives | 2014/34/EU(ATEX) | |
| 2014/30/EU(EMV) | ||
| 2011/65/EU(RoHS) | ||
| 2014/90/EU (MED) | ||
| Marine Approval | DNV GL | |
| Manufacturer´s warranty | 3 years for the device | |
| 1 year for the power supply | ||
| Sensors: see DrägerSensor"& Portable Instruments Handbook | ||
){kind=link}